Ace micromatic
EditorialMetal CuttingProduct Write-ups

CLG 6015 by Ace Micromatic

By Editorial
349

Product Description

CNC PRODUCTION CENTRELESS GRINDER

Salient Features

  • The ribbed structure of bed ensures better static, dynamic rigidity & vibration damping
  • Rigid outboard support with High Precision Bearing for Regulating wheel spindle
  • Heavy-duty pre-loaded high precision roller guideways for in-feed movement
  • Spindle type Dynamic Balancing system for Grinding wheel available as an option.
  • Grinding Wheel & regulating Wheel spindles had undergone FEA analysis for maximum load in dynamic conditions.
  • Two axes CNC Grinding wheel dresser for any profile
  • 2 axis CNC dresser for Regulating wheel as Optional

AUTOMATION FOR CNC CENTRELESS GRINDER

  • Autoloading/unloading equipment for in-feed grinding (Optional)
  • Engine valve Automation
  • Gantry type loading/unloading system
  • Autoloading/unloading equipment for Thru feed grinding (Optional)
  • Vibratory bowl feeder for small workpieces
  • Roller/Belt Conveyor for round tubes and bar

KEY SPECIFICATIONS

Description Units Values
Min-Max (mm) mm 2-60
Max Length in Plunge Grinding mm 145
Center height of wheel from floor mm ~1050
Grinding Wheel
Dia x Width x Bore mm 610X150x304.8
Minimum Diameter mm 410*
Max. Wheel Surface Speed m/s 45
Grinding Wheel Power (Optional) KW 11(15)
Grinding wheel Drive VFD for Constant Surface speed
Auto Balancing- Inside Spindle type AVL as optional
Semi-Auto Balancing AVL as optional
Regulating Wheel
Dia x Width x Bore mm 305 x 200x 127
Minimum Dia mm 240*
Speed Range RPM 10-210
Regulating wheel tilting Degree -3° ~ +5°
Motor Power KW/RPM 1.5/1500
Wheel Mounting Direct on Spindle
INFEED SLIDE
Input resolution mm 0.0001
Minimum increment/pulse mm 0.0005
Swivel of infeed slide Degree ±1°
Servo motor Nm 12
Feedback system Std: Motor Encoder(Opt: Linear Encoder)
Regulating Wheel Infeed Slide Manual
In Case of 1 Axis CNC – Opiton
Servo motor- Nm (12 Nm)
Feedback system mm (Motor Encoder)
Grinding wheel dresser 2 Axes CNC
Least Count mm 0.001
Servo motor- both axes Nm 4 Nm
Reg wheel Dresser Copying template design (2 Axis CNC – Optional)
Sleeve dia mm 50- 500
Feed movement increment on dia- Manual knob mm 0.005
Traverse movement speed mm/min 50- 500
In Case of 2 Axis CNC
Least Count mm 0.001
Servo motor- both axes Nm 4 Nm
Feedback system std: Motor Encoder
GENERAL
CNC Control System Make std: Motor Encoder
Operation voltage volts 415 + 10 % AC 3 Phase
Machine weight kg 5000 (Approx)

GrindingAVLSemi-AutoAVLGrindingAVLSemi-AutoAVL

Grinding Wheel
Dia x Width x Bore mm 610X150x304.8
Minimum Diameter mm 410*
Max. Wheel Surface Speed m/s 45
Grinding Wheel Power (Optional) KW 11(15)
Grindng wheel Drive VFD for Constant Surface speed
Auto Balancing- Inside Spindle type avl as optional
Semi Auto Balancing avl as optional

Grinding Wheel
Dia x Width x Bore mm 610X150x304.8
Minimum Diameter mm 410*
Max. Wheel Surface Speed m/s 45
Grinding Wheel Power (Optional) KW 11(15)
Grindng wheel Drive VFD for Constant Surface speed
Auto Balancing- Inside Spindle type avl as optional
Semi Auto Balancing avl as optional
Min-Max (mm) mm 2-60
Max Length in Plunge Grinding mm 145
Center height of wheel from floor mm ~1050

This content was originally published on the Ace Micromatic website.

Editorial 851 posts 0 comments
You might also like More from author
Leave A Reply