High-speed drilling for small holes
Electrode Pipe Diameter | 0.3 to 3.0 mm |
Max Drilling Depth | 300 mm |
Worktable size ( L X W ) | 600 x 450 mm |
Travel -X-axis | 450 mm |
Travel – Y-axis | 350 mm |
Travel – Z-axis | 300 mm |
Travel – W axis | 230 mm |
Specifications
Daylight | 310 mm |
Shut Height | 80 mm |
Throat | 185 mm Min to 535 mm Max |
Measuring system | Absolute Encoder |
X ,Y & Z axis feed rate(max) | 1000 mm/min |
Resolution of X,Y & Z axes | 5 µm |
Maximum workpiece weight | 600 Kg on machine table |
Maximum workpiece height | 300 mm |
Power supply | AC 415 V±10%, 50HZ ±5%, 3 Phase |
KVA | 5 KVA |
Net weight of the Machine | 2300 kg |
Machine Floor Area | 2300 X 2000 mm |
Mechanical Features
- Robust construction with FG 260 Cast structures
- Deformation free machine with stability and accuracy
- Better flatness and wear resistance to avoid scratching with Granite T–Slot table (Grade Zero) for placement of workpiece
- High sensitive & fast response with, form and fit Linear motion Guideways with AC servo system for X, Y, Z, W axis
- Accurate positioning and repeatability owing to precision ball screw with pre-loaded angular contact Bearings, supported at on both ends
- Compact controller with interchangeable insert-Card type design
- Built-in safety features such as software, hardware and mechanical limit switch
- Intelligent arcing sensor for auto adjustment of functional parameters
- Indigenous high-pressure direct-drive Plunger Pump, with stainless steel body, controlled by solenoid valve
- Effective debris removal with additional wash away port near drilling point
CNC Controller
- Siemens 828 D Dedicated control unit
- Controlled/Programmable Axes : Standard X,Y,Z,W
- Simultaneous controlled axes: X, Y, W
- Monitor: High quality 10.4” TFT color display
- I/O of programs & data transfer: Ethernet,USB port & CF card
- Minimum programming increment: 1 µm
- Program/Datastore capacity: 3 MB
- Electronic handwheel: For manual axes movement
This content was originally published on the Sparkonix website.