Ace Micromatic: DTC-400 XL

The DTC-400 XL is compact and powerful, loaded with BT-30/BBT-30 spindles. The machine is built with an optimally designed structure to take care of cutting forces, cushioning high speed, and accurate tapping. The machine is engineered for cost-effectiveness yet retaining the rigidity of the structure.

The machine is equipped with roller-type LM guideways for delivering better rigidity and superior performance. The machine has high rapid traverses of 60/60/48 m/min on the 3 linear axes respectively. The quick return function enables accurate tapping and reduction in cycle time.

The DTC-400 XL is equipped with High-speed Pocket tilting type Automatic Tool Changers with 16 tool capacity with chip to chip time of 1.8 sec, designed based on the machine size and suitable application. With a rigid structure and high speeds, one can achieve high accuracy and productivity on these drill tap machining.

• High-Speed Drill Tap center with maximized cutting time
• Highly rigid structure
• Pocket tilting type front-mounted ATC
• Chip to Chip time of 1.8 sec
• 16 tool ATC
• 60 / 60 / 48 m/min rapid rate for X/Y/Z axes
• High Spindle speed up to 20000 rpm with the direct-drive spindle

Key Specifications

This content was originally published on the Ace Micromatic website.